Home > Support > Data Acquisition Support > Software Downloads

Software Downloads

SQ2020/40 V4.0 Firmware
Contains V4.0 firmware for the SQ2020 and SQ2040 Squirrel Data Loggers.
Note: This firmware requires V3.0 or above of the Squirrelview software for the logger to run correctly. Includes release note and both V4 Aquisition and Controller firmware, seek advice from technical support in case of queries.
(239k)



Grant Software and Data Logger Compatibility Chart

Compatibility Chart(10k)

 

All the following software applications / tools are unsupported by Grant Instruments Ltd.

On-Line meter Application:
Select this to install an online metering application. This will allow data to be collected from a Squirrel 2010, 2020 or 2040 series data logger connected to the host PC without the need to run the full SquirrelView application.

The Online meter application is fully configurable via its control panel, providing event logging and access to configurations such as metering interval, start up preference, communication settings, output filename, directory and format. Online metering can be performed using the usual communication methods of RS232, USB, Modem and Ethernet connections.

The metered data can then be automatically e-mailed from the host PC at pre-determined intervals using the Windows scheduler ® application to which it links.
(722Kb)

Squirrel data logger Communications driver:

Select this to install a communication driver for the Squirrel 2010, 2020 or 2040 series data loggers. This can then be incorporated into other 3rd party software tools and developments for bespoke and specialise software solutions.
(2208Kb)

Example Excel™ macro to directly import Squirrel data:

This example Excel macro uses the Active-X controller included in the above communications driver to directly log Squirrel data into an Excel spread sheet.
(55Kb)

CSV Converter Application:

Select this to install a CSV converter application. This file converter allows any Grant software export file (a CSV file format with the extension *#**) to be converted to a simple tabular HTML document, for use with an existing html project.
(212Kb)